Loading...

Before You Rely on a Survey for Your Building Lot

Property survey illustration

What I cover in this video

I walk through four documents you may run into. A subdivision plat shows the layout of the recorded lots and streets. A boundary survey addresses property lines and corners. For a build, a house location plan can help show where the house, well and septic will go. On a resale, an as-built or physical survey may document improvements such as fences, pools and sheds.

Watch the video

A subdivision plat gives you the larger picture

Start by matching the parcel to the recorded subdivision plat. Find the lot number, adjoining lots and streets. Read the notes and look for references to other recorded documents. Maryland’s State Archives explains how to locate plats and how an earlier deed can help you trace a property when you don’t have the recording reference. Maryland State Archives guide to plats.

A boundary survey answers a property-line question

If the plan depends on putting a garage near a side line, explain that before ordering the work. Ask the surveyor to describe the scope, whether corners will be marked and which drawing you will receive. Maryland specifically limits what buyers can rely on a simple location drawing to establish about a boundary. Maryland standards for location drawings.

Placing the house, well and septic

The drawing used to plan a new build needs enough detail for the people reviewing that build. Bring the proposed footprint to your surveyor or engineer and ask how the house, driveway, well and wastewater areas will be shown. In particular, identify whether a feature on the drawing already exists or is only proposed. Calvert County residential application checklist.

What an as-built can show after work is complete

On an improved property, look for what the surveyor actually located, when they visited and which improvements came later. If you see a pool or fence in the yard that is missing from an older drawing, flag it. Ask your own surveyor whether the document is adequate or current fieldwork is needed to assess your concern. Maryland standards for location drawings.

Show the surveyor what you intend to do

If you’re planning a detached garage near a side yard, bring a sketch to the surveyor. Explain where the garage doors would face and how you’d get to them. That gives the surveyor a much clearer assignment than simply asking for a survey.

Look at the date on any drawing you receive. A fence, shed or driveway extension may have appeared since the fieldwork. Walk the property with the drawing and flag differences for the surveyor before using it to make a building decision.

Read the video transcript

Transcript from the original recording, with light edits for readability.

0:00 Let's build our new custom home, but first we need to get a survey. There are four different types of survey. First one is your subdivision plat that's going to show all the lots in the community and the streets. Second, and I think it's most important if you have a large tract of land is actually a boundary survey where they're going to go in and mark all the different corners. Typically when you're building a house, you're going to have a house location survey. It's going to show your house, the location of your well, and your septic if you have this. And the last one that you usually get when you buy a resale is an as-built or a physical survey, which is kind of like a house location survey. We'll show the house, but it's also going to show any fence, pool, sheds, and encroachments, and things like that. I would advise all my buyers to purchase their own survey, even if it's not required by the lender. Do not accept any surveys from the listing agent or the [unclear]. They do not show any new improvements or encroachments that you will be responsible for when you purchase that property. Cheers.

Frequently asked questions

Official sources

See all videos in the custom home series